Haier HWD–C1000TXVE ME User Manual page 17

WATER INLET AND INLET fILTER
To prevent blockage to the water supply by ingress of foreign
substances, clean the water inlet and inlet filter regularly .
MoVINg THE MACHINE
If the machine is to be moved to a distant location, replace
the transportation locks removed before installation to prevent
damage as shown below .
1 . Remove the blanking plugs .
2 . Remove the back cover
3 . Insert the synthetic stabilisers and the transportation bolts .
4 . Tighten the bolts with a spanner .
5 . Replace the back cover .
LoNg PERIoDS of DISUSE
If the washer dryer is left idle for a long period, pull out the
electrical plug and turn off the water supply . open the washer
dryer door to prevent formation of moisture and odours . Let
the door open while not used .
MAINTENANCE
1 .
3 .
17
2 .
4 .
5 .
Powe r Start/Sto p
W ash Rinse S pin D ry Te mp Te mp W ash
Speed Speed Quickwash Quickwash Rinse
W ool W ool Spin Spin
Delay E xtra Dry E coTime Start/ Synthetics Synthetics Dry Dry
rins e Paus e
Cotton&Line Cotton&Linen Ir o n Ir o n
Prewash Prewash Air wash Air wash