Before Operation; Paper/Ink Ribbon Set; Loading Print Paper - Mitsubishi Electric CP31W Operation Manual

BEFORE OPERATION

Before printing,
1. Turn on the power of this unit.
2. Load print paper into the paper cassette.
3. Load the paper cassette with print paper into the unit.
4. Load a ribbon cartridge to the unit. (page 21)
Make sure to use the following types of paper sheet and ink ribbon set.

PAPER/INK RIBBON SET

Model Size
CK30S S size
CK30L L size
CK30S4P S size
CK30L4P L size
Adjust the paper cassette to the size of the paper to be loaded. Do not
force paper that is too long or too wide into the paper cassette.
• Use the paper cassette designed for this unit only.
Remove the tray (cover) of the paper cassette.
Adjust the paper cassette to secure the paper.
Raise the plate in the cassette to use S-size paper.
Keep the plate laid fl at to use L-size paper.
Take the print paper out of the packaging together with
the protection sheet.
• The paper may be stuck together. Loosen it well before unpacking.
• The protection sheet is placed on the top of the print paper to protect
the printing surface. Hold the print paper together with the protection
sheet so that you do not touch the printing surface. Fingerprints or
dust on the paper's surface may degrade the print quality.
PAPER/INK RIBBON SET
No. of prints
80
50
60
40

LOADING PRINT PAPER

NOTE
NOTE
Usage Remarks
Color print 3 packs contained
Color print 4 packs contained
Color print 3 packs contained
(with surface lamination)
Color print 4 packs contained
(with surface lamination)
Tray (cover)
For S size
paper
For L size
paper
19