Table of Contents
Advertisement
TROUBLESHOOTING
The image is not printed.
The ribbon cartridge can not be unloaded.
The ribbon cartridge can not be loaded.
The colour or picture quality is different
between the memorized image and the
printed image.
The picture quality is different between
the image on the monitor screen and
the printed image. (When the colour
and picture quality are same between the
image stored in the memory and the
printed image.)
The set comments do not appear on the
print paper.
50
Is the image data stored in this unit?
Is the ribbon cartridge or print paper exhausted?
Check the status.
Is the paper cassette loaded correctly?
Check the status display. Refer to
"INDICATION ON THE STATUS DISPLAY &
COUNTERMEASURES". (page 46)
Is the status indicator blinking?
When the status indicator (
slowly, the temperature of the thermal head may
get high. Wait until the temperature drops to a
level where printing becomes available.
Turn off the power of this unit, then turn it on
again and press the RIBBON EJECT button. If this
error is not solved, contact your dealer.
Is the power of this unit turned on?
Is another ribbon cartridge already loaded in this
unit?
Check the status.
Is the colour of the image stored in the memory
adjusted?
Adjust the colour of the image stored in the
memory with COLOR ADJ menu. Refer to page
37.
Is the image on the monitor screen adjusted?
Adjust the image on the monitor screen with
COLOR, BRIGHTNESS and CONTRAST in the
OUTPUT menu.
Refer to page 38.
Is the COMMENT set to OFF?
Set COMMENT to ON. Refer to page 35.
Is the comment inputted?
Input the comment on the menu. Refer to page
36.
) keeps blinking
Advertisement
Table of Contents
