Buzzer - Miele G 1520 Operating Instructions Manual

Operation

Buzzer

A buzzer sounds at the end of the
programme or if there is a fault.
You will hear the buzzer at the end of a
programme in bursts of five with a short
pause in between. The buzzer will
continue to sound for up to an hour if
you do not switch the dishwasher off.
In the case of a fault, the buzzer will
sound continuously for up to two
minutes if you do not switch the
dishwasher off or correct the fault.
The buzzer is activated as standard at
the factory.
You can deactivate the buzzer at the
end of a programme if you wish. The
buzzer will still sound if there is a fault,
even if it has been deactivated.
^ Switch the dishwasher off with the
On/Off button s.
^ Press the Start/Stop button in and
whilst holding it in switch the
dishwasher on with the On/Off button
s.
Keep the Start/Stop button pressed in
for at least four seconds until the
Start/Stop indicator light comes on.
If this does not happen, start the
procedure from the beginning again.
40
^ Press the Delay start button four
times.
The Delay start indicator will flash
briefly four times at intervals.
The characters flashing in the display
show whether the buzzer at the end of
the programme is activated or
deactivated.
– "p 1": the buzzer is activated
– "p 0": the buzzer is deactivated
^ Press the Start/Stop button to alter
the setting.
The setting is now stored in memory.
^ Switch the dishwasher off with the
On/Off button s.