General Problems - Miele G 1520 Operating Instructions Manual

General problems

Problem
The "Spray arm"
indicator light is
flashing.
Detergent residue is
left in the dispenser at
the end of a
programme.
The detergent lid
cannot be closed
properly.
At the end of a
programme there is a
film of moisture on the
inside of the door and
the interior walls.
Water remains in the
wash cabinet at the end
of a programme.
Possible cause
Items are blocking
the path of the
middle spray arm.
The middle spray
arm jets are blocked.
The dispenser was
still damp when
detergent was
added.
Clogged detergent
residue is blocking
the catch.
This is caused by the
drying system and
does not indicate a
fault.
The filter combination
in the wash cabinet
is clogged.
The drain pump or
non-return valve may
be blocked.
The drain hose is
kinked.
Problem solving guide
Remedy
Open the dishwasher door and
rearrange the items which are
obstructing the spray arm.
– Switch the dishwasher off
with the On/Off button s.
Then:
– Clean the spray arm. See
"Cleaning and Care".
Make sure the dispenser is dry
before adding detergent.
Clean the detergent from the
catch.
The moisture will dissipate after
a short while.
Before rectifying the problem
you must:
– Switch the dishwasher off
with the On/Off button s.
Clean the filter combination.
See "Cleaning and Care".
Clean the drain pump or the
non-return valve. See "Problem
solving".
Remove any kink from the drain
hose.
51