General References; Table 1-2. General Reference Information For Pci Adapters - NEC Express5800/320Ma Manual

Duplex and simplex mode are also indicated on the PCI slot status LEDs that are
located at the rear of each system. Furthermore, because PCI slot status can affect
other subsystems, a missing or broken PCI adapter might change ftSMC properties
and LED states for an I/O enclosure as well as an entire system.
For more information about using ftSMC to determine whether your PCI adapters or I/O
enclosures are operating in duplex mode, see the Express5800/320Ma: System
Administrator's Guide. For information about using status LEDs to determine the PCI
slot status, see the operation and maintenance guide for your system, as listed in
Table 1-2.

General References

Table 1-2 lists the location of information about PCI adapters in other
Express5800/320Ma documents.

Table 1-2. General Reference Information for PCI Adapters

Topic
Hardware installation instructions
Overall view of system administration and
using ftSMC
Device IDs
Using VTM console to check system
software and network connections to the
VTM adapter, and to verify if the firmware
for the adapter is up to date.
N O T E
If you remove a simplexed PCI adapter, or if it fails,
communications for applications related to that adapter
will terminate. Removing one of two duplexed PCI
adapters, however, will not affect communications. To
increase the fault tolerance of a system, always install PCI
adapters for critical applications in paired slots, and
ensure that the adapters are marked as duplexed in
ftSMC.
Reference Document(s)
Express5800/320Ma: Installation Guide
Express5800/320Ma: System Administrator's Guide
Express5800/320Ma Virtual Technician Module User's
Guide

General References

Overview of PCI Adapters 1-5