Configuring Ethernet PCI Adapters
Figure 2-2. RJ-45 Connector
Configuring Ethernet PCI Adapters
Use the PROSet utility to configure Ethernet PCI adapters (see
page
2-7). PROSet is part of the Ethernet PCI adapter software.
Use PROSet to perform the following tasks:
•
Locate a PCI adapter (see
system with many Ethernet PCI adapters.
•
Configure the line speed and/or duplex mode of an Ethernet PCI adapter with
values appropriate to the adapter and the media to which it connects (see
"Configuring Link Speed and Duplex Mode" on page
•
Configure Ethernet PCI adapters into teams (see
Teams" on page
"Configuring Ethernet Teams" on page
•
Assign virtual LANs to a team (see
about how to configure the VLANs, see
page
2-22.
•
Manage a team by removing or adding adapters, or removing the team (see
"Managing Ethernet Teams" on page
•
Modify the advanced settings of an individual Ethernet PCI adapter, a team, or a
VLAN (see the PROSet online help).
2-6
Express5800/320Ma: PCI Adapter Guide
"Locating Ethernet PCI Adapters" on page
2-9). For information about how to configure the teams, see
"Virtual LANs" on page
mpci009
mpci083
2-16).
"Types of Fault-Tolerant Ethernet
2-14.
"Configuring Virtual LANs Over a Team" on
2-27).
"Starting PROSet" on
2-15) in a
2-13). For information