Problem
While
Paper out
receiving
Paper jam
Paper does not feed.
Paper is not exited at the end of
a print job.
The Automatic Print Reduction
feature does not work.
Communicat-
No dial tone heard
ing
The machine does not receive
automatically.
Cannot send or receive.
Operation
Operation rejected
214
Symptom
An error massage will appear on the display if
the machine has run out of the paper while
receiving a document. Load paper.
If paper jam occurs, an error code is displayed.
Remove the jammed paper.
Check if the Paper Tray is loaded with paper.
Load paper as directed by relevant instructions.
Check if the paper has jammed in the machine.
Check the setting of the Function Parameter "24
Print Reduction" (Fax/Email Settings > Fax
Parameters).
• Check the telephone line connection.
• Check the telephone line.
• Check the telephone line connection.
• Check the receive mode settings.
• If the Function Parameter "13 Auto Print
JRNL" (Fax/Email Settings > Fax Parameters)
is set to "Valid", and the machine is printing
the received document(s) from memory, which
also happens to be the 200th transaction, the
machine will not answer automatically until the
Transaction Journal completes printing.
An error code appears on the display. See the
error code table and identify the problem.
Turn OFF the machine momentarily, and then
turn it ON again.
Action
Refer to
Operating
Instructions (For
Maintenance)
Operating
Instructions (For
Maintenance)
Operating
Instructions (For
Maintenance)
Operating
Instructions (For
Function
Parameters)
Checking the
Telephone Line
(See page 221)
Operating
Instructions (For
Function
Parameters)
Information
Codes (See page
215)