Information Codes - Panasonic DP-C266 Operating Instructions Manual

Information Codes

In the event of communication failures, information codes appear in the transmission result or
transaction journal.
When an information code is displayed, take necessary action as recommended in the table below.
For definitions of the information code not found here, refer to the User (U)/Jam (J)/Machine (E) Error
Codes in the Operating Instructions (For Maintenance) of provided CD-ROM.
Info. Code
030 Document is misfeeding.
031 Document is too long or
jammed.
Document length exceeds 78.8"
(2 m) in "Std" and "Fine" mode
only.
The length limitation for "Super
Fine" and "600dpi" mode is
subject to the available memory
size.
061 ADF Cover is open.
212 Communication error occurred.
400 During initial handshake,
receiving station did not respond
or a communication error
occurred.
401 Remote station required a
receiving password to receive
the document. Remote station
does not have Confidential
Mailbox.
402 During initial handshake,
communication error occurred.
403 No polling capability at the
remote side.
404/405 During initial handshake,
communication error occurred.
Problem
Reload the document properly.
Remove the document jam.
Adjust the Original Guides.
Reload the document properly.
Remove the document jam.
A3/
Ledger
B4
A4/
Letter
Close the ADF Cover.
Check with the other party.
Check with the other party.
Reload the document and send again.
Check the remote station.
Reload the document and send again.
Ask remote side to set to be polled.
Reload the document and send again.
Action
600dpi Super Fine
(Max. Length) (Max. Length)
2-Sided
2-Sided 2-Sided
(Short
(Long (Long
Edge)
Edge) Edge)
1-Sided
19" 54" 28"
(486 mm) (1387 mm) (730 mm)
22" 34"
(577 mm) (866 mm)
26" 40"
(684 mm) (1027 mm)
Refer to
Operating
Instructions (For
Maintenance)
2-Sided
(Short
Edge)
1-Sided
54"
(1387 mm)
Continued on the next page...
215