Plot Function Instructions - Brother HL-1050 Technical Reference Manual

8/2/2010
7.5.

Plot Function Instructions

Instruction
AC
FT
LA
LT
PW
RF
SM
SP
SV
TR
UL
WU
AC - Anchor corner
AC [ X, Y ] [;]
X ; x-coordinate of starting point of fill pattern
Y ; y-coordinate of starting point of fill pattern
This command specifies the anchor corner which is the starting position of a fill pattern.
If no parameters are specified the lower left hand corner of the PCL picture frame, according to the current
coordinate system, becomes the anchor position. This is equivalent to AC0,0;
User units or graphics units may be used.
The value of the coordinates are real numbers in the range (-2
10 '-Anchor Corner -
20 WIDTH "LPT1:",255
30 LPRINT CHR$(27); "E";
40 LPRINT CHR$(27); "%0B";
50 LPRINT "IN;SP1;";
60 LPRINT "PA3000,3000;FT3,400,45;"
70 LPRINT "RR1000,1000;ER1000,1000;"
80 LPRINT "PR1000,0;FT4,400,45;"
90 LPRINT "RR1000,1000;ER1000,1000;"
100 LPRINT "PR1000,0;FT3,400,45;"
110 LPRINT "RR1000,1000,ER1000,1000;"
120 LPRINT "PA3000,1500;AC3000,1500;"
130 LPRINT "RR1000,1000;ER1000,1000;"
140 LPRINT "PA4000,1500;AC4000,1500;FT4,400,45;"
150 LPRINT "RR1000,1000;ER1000,1000;"
160 LPRINT "PA5000,1500;AC5000,1500;FT3,400,45;"
170 LPRINT "RR1000,1000;ER1000,1000;"
180 LPRINT CHR$(27); "%0A";
190 LPRINT CHR$(27); "E";
200 END
<Sample 38>
Function
Anchor Corner
Fill Type
Line Attribute
Line Type
Pen Width
Raster Fill Definition
Symbol Mode
Select Pen
Screened Vectors
Transparency Mode
User-defined Line Type
Select Unit for Pen Width
CHAPTER 4 HP-GL/2 - 30
) to 2 - 1.
30 30