Media Type Selection; Output Tray - Brother HL-1050 Technical Reference Manual

4.1.2.

Media type selection

Esc&n# (27)(38)(110)#
# stands for the media type of paper to be used.
Values for # correspond to the media type shown in the table.
6WdPlain
8WdRegular
5WdThin
6WdThick
7WdThick2
5WdBond
13WdTransparency
10WdEnvelopes
9WdEnvthick
8WdEnvthin
9WdRecycled
9WdPostcard
6WdLabel
7WdGlossy

4.1.3. Output tray

Esc&l#G (27)(38)(108)#(71)
# denotes the output tray.
1: Select the printer output tray.
3: Select #1 bin.
4: Select #2 bin.
5: Select #3 bin.
6: Select #4 bin.
7: Select #5 bin.
8: Select #6 bin.
9: Select #7 bin.
10: Select #8 bin.
11: Select #9 bin.
12: Select #10 bin.
100: Select the finisher tray (HL-3260N)
This command selects the specified output tray.
This command is ignored when the specified tray is not available.
The PJL OUTBIN command is ignored when this command is executed.
If the printer has data to print when this command is executed, the command is valid from the next page
immediately after the data is printed.
<1Bh><26h><6Eh>#
Model
Set as Plain Paper.
Set as Thin Paper.
Set as Thick Paper.
Set as Thicker Paper.
Set as Bond Paper.
Set as Transparent Paper.
Set as Envelope.
Set as Thick Envelope.
Set as Thin Envelope.
Set as Recycled Paper.
Set as Post Card.
Set as Label.
Set as Glossy
<1Bh><26h><6Ch>#<47h>
(CT:HL-8050N)
CHAPTER 2 "PCL" - 17
HL- HL-
2070N/5240/5250DN/ 4040CN/4050CDN/
5270DN/5280DW/ 4070CDW/3040CW
2150N/2170W/ /2250DN/2270DW
5340D/5350DN/5370
DW/5380DN
8/2/2010
HL-
4140CN/41
50CDN/45
70CDW