Pjl Mailbox Protection & Bin Number Setting; Pjl Avoidance Of Mailbox Bin Full - Brother HL-1050 Technical Reference Manual

8/2/2010
3.1.2. PJL mailbox protection & bin number setting
Format
@PJL SET/DEFAULT MAILBOXPROTECT=TrayNumber
Parameter
TrayNumber
<HL-2060/2460/7050>
Lower unit:
Lower unit + Upper unit: #1 to 10 from bottom to top
<HL-3260>
#1 to 4 from bottom to top
Default = 0
Explanation
This command sets the bins with numbers larger than the TrayNumber specified as mailbox use only. They
cannot then be used for either stacker or sorter functions.
If the bin number is set to 0, the mailbox protection is released, then all bins can be used for stacker and
sorter functions.
If the bin number is set out of the effective range, this command is ignored.
<HL-2060/2460/7050>
MX not installed
Lower unit installed
Lower & upper unit installed
<HL-3260>
MX not installed
MX installed
The difference between the SET and DEFAULT selection and the effective period of this setting follow the
PJL specifications.

3.1.3. PJL avoidance of mailbox bin full

Command
@PJL SET/DEFAULT AVOIDMAILBOXFULL=ON/OFF
Parameter
ON/OFF
OFF:
ON:
Default = OFF
Explanation
When paper is ejected into a bin specified by a setting command which limits the bin selection, this
command selects whether to eject automatically paper to the printer face-down output tray or not when the
specified bin is full.
The difference between the SET and DEFAULT selection and the effective period of this setting follow the
PJL specifications.
APPENDIX D REFERENCE LIST OF MX-2000/4000/5000/7000 SERIES UNIQUE COMMANDS - 6
#1 to 5 from bottom to top
Setting type
Setting type
Paper is ejected to the printer face-down output tray when the specified tray is full.
Paper is not ejected to the printer face-down output tray even when the specified tray is full.
Effective range
0
0, 1 ∼ 5
0, 1 ∼ 10
Effective range
0
0, 1 ∼ 4