Toshiba GA-1170 Service Manual page 12

3. Connect the USB cable and the network cable.
1) Attach the supplied cable clamp to the position shown in the illustra-
tion.
2) Connect the USB cable to the network expansion kit and the main
unit.
At this time, reduce slack of the cable with the cable clamp as
shown in the illustration.
3) Connect the network cable.
Insert the power plug of the copier to the outlet, turn the main
switch of the copier to the "ON" position, and then perform net-
work setting and installation of the software.
GA-1170 UNPACKING AND INSTALLATION
3 – 2