Chapter 2
This chapter describes the steps you must take to install and configure the various components in your
network to utilize the Siemens Business Gateway. This includes
Internet router,
configuring the PC
router configuration. Before beginning installation, make sure you meet all
Installation Requirements
Before beginning the installation and configuration of the various components on the network, make sure you
received all the
package
your
network Service
Package Contents
Your package should contain the items listed below. If you determine anything to be damaged or missing,
please contact the dealer from whom the equipment was purchased.
•
One Siemens 5930 or 5935 Business Gateway
•
One Siemens Documentation CD-ROM
•
One AC power supply module and cord
•
One Ethernet cable, RJ-45
•
One DSL cable, RJ-11, purple label
•
One RJ-45 to DB-9 serial port adapter (console)
•
5930 or 5935 Business Gateway Quick Start Guide
•
Safety and Certifications document
PC Requirements
At a minimum, your computer must be equipped with the following to successfully install the broadband
Internet router.
•
CD-ROM Drive
•
Ethernet network interface card
•
TCP/IP network protocol installed on your PC
•
Web browser
•
Terminal emulation software, if you want to configure your router via your computer's serial port before
placing it into service on a network.
SIEMENS
Installation
to use the Internet router for Internet access, and setting up the Internet
contents, meet the basic
Provider.
setting up the hardware connections
PC
requirements, and have the necessary information from
installation
requirements.
to the
9