Installing a Processor
Observe static precautions. Use an antistatic wrist strap.
Hold the processor only by its edges.
Installing a second processor that is of a different type than
the first processor will result in system damage. Do not
touch or bend the processor's exposed pins.
you must remove the terminator from the secondary
processor socket.
1. Raise the ZIF socket lever to the up position. See Figure 3.
2. Remove the terminator from the secondary processor socket.
3. Position the processor over its ZIF socket so the processor pins align with
the socket holes. Note that one corner of the processor has three pins that
should be positioned over the corner of the socket that has the three
matching pin holes. See Figure 4, A.
6
120Ra-1 Pentium III Processor Installation
! CAUTION
! CAUTION
Note:
When adding a second processor to your system,
Figure 3. Raising the ZIF Socket Lever