Installing The Printer Driver - Sharp AJ-2100 Operation Manual

INSTALLING THE PRINTER DRIVER

Installing onto Windows 98 (Parallel interface) / 2000
The screen images in this section are those of Windows 98.
Make sure that the printer is connected to your computer.
1
Turn on the printer, and then turn on your computer.
2
On this step, "Add New Hardware Wizard" on Windows 98 or "Found New
Hardware Wizard" on Windows 2000 will appear.
If neither of these screens will appear on your computer, refer to either of "Installing
onto Windows 95 / 98" (page 26) or "Installing onto Windows 2000 / NT4.0"(page 29)
according to your operating system.
Click the "Next" button.
3
Insert the supplied CD-ROM into your CD-ROM drive.
4
Check the radio button for "Search for the best driver for your
5
device (recommended)", and then click the "Next" button.
On Windows 2000, check the radio button for "Search for a suitable driver for my
device (recommended)", and then click the "Next" button.
Select the "Specify a location:", type "D:\ENGLISH\WIN9X", and
6
then click the "Next" button.
(Change "D" to correspond to the letter of your CD-ROM drive.)
22