Table of Contents
Advertisement
Close the maintenance cover.
12
Close the front cover.
13
Press both edges of the front cover with both of your hands until it locks.
Confirm on the display panel that print heads and ink tanks
14
have been securely set to the unit.
The unit automatically aligns the print heads, and a test chart will be printed.
If a message appears, which lets you know that any of print heads or ink tanks
have not been installed in their right positions, go back to the step 1 to repeat the
procedure.
Align the print heads following the procedure shown in
15
"ALIGNING THE PRINT HEAD" (See the next page). Start from
step 4 to perform the alignment.
To keep good print head quality, keep all the ink tanks installed to the
corresponding print head.
During ink tank replacement, if the cover is left open for more than 8 minutes, the
carriage will automatically return to its home position.
INSTALLING THE PRINT HEADS AND INK TANKS
Cleaning the Print
Head
Printing...
Alignment Patterns
15
Advertisement
Table of Contents
