Table of Contents
Advertisement
IDENTIFYING UNIT PROBLEMS
Copying does not run smoothly
Check 1 Have you specified the paper size preference?
After loading different size of paper, make sure to change the paper size setting through
the paper size setting option.
Check 2 Have you changed the "Brightness" or "Intensity" setting options?
Change the "Brightness" and "Intensity" settings appropriately.
Check 3 Is the original table glass dirty?
Clear the dirty portions on the original table glass.
Check 4 Is the original stained or marked?
Use a better quality original.
Check 5 Is the print head dirty?
Clean the print head. (See page 52)
Check 6 Have you align the print heads correctly?
Align the print heads. (See page 16)
Check 7 Is the paper too thick?
Turn the paper knob to "Thick Paper (
Use paper of 60g/m
Unable to copy
Check 1 Has a paper jam occurred in the paper tray?
Follow the steps below to remove the jammed paper.
Remove the jammed paper.
1)
Open the jam cover on the rear side of the unit by lifting its tab, and then
remove the jammed paper.
If you are unable to remove the jammed paper in this manner, go on to step 2.
62
)" position.
2
2
- 200g/m
.
Advertisement
Table of Contents
