Setting Up Your Vcr/Dvd Combination; Connecting To A Tv Or A Stereo Tv; Connecting To A Tv Equipped With S-Video Input Jack - Sharp DV-NC100 Operation Manual

SETTING UP YOUR VCR/DVD COMBINATION

CAUTION:
• Be sure to turn off the VCR/DVD and equipment to be connected before connecting.
• Read through the operation manual for the equipment to be connected.
• Be sure to keep the VCR/DVD connection cables separate from the TV antenna cable when you install the VCR/DVD,
because it may cause electrical interference when you are watching television programmes.
• DTS audio cannot be produced with an analogue connection.

Connecting to a TV or a stereo TV

DVD
DIGITAL ANALOG
AUDIO OUT AUDIO OUT
SCART cable
(commercially available)
To SCART
terminal
Connecting to a TV Equipped with S-
VIDEO Input Jack (DVD only)
If your TV has no SCART input jack but has an S-VIDEO
input jack, use a commercially available S-VIDEO cable to
connect from the VCR/DVD to the TV. You will still need the
SCART cable or Round coaxial cable for VCR features. (S-
VIDEO connection is available only in DVD mode.)
DIGITAL
AUDIO OUT
(White)
(Red)
To ANALOG
AUDIO OUT jacks
AUDIO cable
(supplied)
(White)
(Red)
To AUDIO input
jacks
L R
AUDIO
IN
TV (with external input jacks)
• You will not be able to hear all of the sound being output by the VCR/DVD if you use the AUDIO cable (supplied) to a
monaural TV that has only one AUDIO input jack.
NOTES:
• Be sure that the colours of the jacks and plugs match up when connecting the cable.
• Connect the VCR/DVD directly to the TV. If you attempt to view video on a TV connected via a VCR, the copy protection
function will scramble the picture.
• If you want to listen to the audio through audio equipment, connect only the S-VIDEO or VIDEO cable to the TV.
S-VIDEO
OUT
VCR AV2 (DECODER)
L
DVD/VCR AV1 (TV)
R
To EURO AV1 (TV)
OUT terminal
Round coaxial cable
(TV)
DVD
ANALOG S-VIDEO
AUDIO OUT OUT
VCR AV2 (DECODER)
L
DVD/VCR AV1 (TV)
R
To S-VIDEO
OUT jack
S-VIDEO cable
(commercially available)
To S-VIDEO
input jack
S-VIDEO
INPUT
from Antenna
AERIAL
To RF OUT
RF OUT
jack
(supplied)
To AERIAL
jack
Connecting to a TV Equipped with
RCA type Input Jack
If your TV has RCA type audio and video input jacks, you
may connect to EURO AV1 (TV) OUT terminal through the
SCART output adaptor (supplied). When using this connec-
tion, do not connect a decoder to the EURO AV2
(DECODER) terminal of your VCR/DVD. Other equipment,
such as a VCR or camcoder, can be connected to EURO
AV2 (DECODER) terminal. If the connected equipment has
RCA type audio and video input jacks, use a SCART input
adaptor (commercially available).
– 10 –
CAUTION:
• Connect the VCR/DVD directly to the
TV. Do not connect the VCR/DVD to a
VCR, then connect the VCR to the TV.
Copyright protection in the VCR could
distort the picture playing on the
VCR/DVD.
VCR/DVD
VCR
TV
DVD
DIGITAL ANALOG S-VIDEO
AUDIO OUT AUDIO OUT OUT
VCR AV2 (DECODER)
L
DVD/VCR AV1 (TV)
To EURO
R
AV1 ( TV )
OUT terminal
SCART output
adaptor (supplied)
To VIDEO output
jack
(Yellow) (White) (Red)
VIDEO cable AUDIO cable
(supplied) (supplied)
(Yellow) (White) (Red)
To VIDEO input
jack
L R
VIDEO AUDIO
IN IN
TV (with external input jacks)
To AUDIO output
jacks
To AUDIO input
jacks
EN