Connecting To Audio Equipment; Playing 2 Channel Audio - Sharp DV-NC100 Operation Manual

Vcr/dvd combination
Table of Contents

Advertisement

SETTING UP YOUR VCR/DVD COMBINATION

Connecting to Audio Equipment

Connecting the VCR/DVD to audio equipment provides normal stereo sound, plus powerful stereo sound enhanced by Dolby
Digital 5.1 channel surround sound, DTS and MPEG Audio.

Playing 2 channel audio

C C Analogue audio connection
To AUDIO
OUT jacks
Audio cable
(supplied)
C C Digital audio connection
You can make this connection using a coaxial digital cable.
To COAXIAL
DIGITAL AUDIO
OUT jack
Digital Connection to an MD to Record a CD
Some Audio CDs have a short silent section between musical tracks. When sound from discs such as these is digitally
recorded by connecting the VCR/DVD directly to a digital recorder (such as an MD recorder), the music may be recorded con-
tinuously and track numbers may be lost.
C C Digital Connection to Audio Equipment or MD Recorder without a Dolby Digital Decoder
• Audio CD
Audio CDs can be transferred digitally to other equipment such as an MD recorder, play the disc as you would normally with
the audio mode set to "L+R" and use the connection shown above. Audio CDs recorded in the DTS format cannot be trans-
ferred digitally or via analogue.
• DVD
DVDs recorded in Dolby Digital 5.1 channel surround sound, DTS or MPEG Audio cannot be connected digitally to external
recording equipment such as an MD recorder.
The audio source on a disc in a Dolby Digital 5.1 channel surround format cannot be recorded as digital sound by an MD
recorder.
It may be possible to record "DOLBY DIGITAL" or MPEG Audio via a digital connection if the VCR/DVD output is set to
"DPCM" (Refer to page 27 "Audio Setting"). Analogue recording is possible. but not for DTS recorded audio.
DVD
DIGITAL
ANALOG
S-VIDEO
AUDIO OUT
AUDIO OUT
OUT
(White)
VCR
AV2 (DECODER)
L
DVD/VCR
AV1 (TV)
R
(Red)
To amplifier
audio input jacks
(White)
(Red)
DVD
DIGITAL
ANALOG
S-VIDEO
AUDIO OUT
AUDIO OUT
OUT
VCR
AV2 (DECODER)
L
DVD/VCR
AV1 (TV)
COAXIAL
R
DIGITAL IN
COAXIAL
– 11 –
Amplifier of stereo system, etc.
ANALOG INPUT
L
R
Coaxial digital cable
(commercially available)
To coaxial digital
input jack
AERIAL
RF OUT
Jack and Plug Colours
Audio Left: White
Audio Right: Red
AERIAL
RF OUT
Audio equipment
with coaxial
digital input jack
EN

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dv-nc100ru

Table of Contents