Dvd Audio Connections; Connecting A Tv Equipped With S-Video Input Jacks; Connecting To Audio Equipment; Playing 2 Channel Audio - Sharp DV-NC70H Operation Manual

DVD Audio Connections

Connecting a TV Equipped with S-VIDEO Input Jacks

When you want to achieve a better video image by connecting a TV equipped with an S-VIDEO input connector
to the Unit, you should use an S-VIDEO lead (commercially available) to connect the TV to the Unit.
Please note, if the Output Selector Switch is set to RGB, no signal will be output from the S-VIDEO
socket.

Connecting to Audio Equipment

Connecting the Unit to audio equipment provides normal stereo sound plus powerful stereo sound enhanced
by Dolby Digital (5.1 channel), DTS, and MPEG Audio.

Playing 2 channel audio

I Analogue Connection
To S-VIDEO
input jack
S-VIDEO
INPUT
TV (with external input jacks)
If the Unit is set to OPERATE ON, the DVD signals will be output from the DVD OUT jacks at all times.
(The DVD signals will be output from the DVD OUT jacks also when using the VCR.)
DVNC70H018_024.pm6
S-VIDEO lead
(commercially available)
www.sharp.co.uk/support
21
Required lead
VIDEO/AUDIO lead (commercially available)
White (L)
Red (R)
S-VIDEO lead (commercially available)
S-VIDEO
To AUDIO
RGB VIDEO
LINE 2
OUT jacks
DVD OUT
DIGITAL
OUTPUT
SELECTOR
AUDIO
LINE 1 (TV)
(Red)
S-VIDEO OPT.
R
AUDIO
(White)
L
To S-VIDEO
OUT jack
VIDEO/AUDIO lead
(commercially available)
Jack and Plug Colours
To amplifier
audio input jacks
(White)
(Red)
Amplifier of stereo system, etc.
29/8/02, 2:57 pm
White (L)
Red (R)
VCR/DVD OUT ANTENNA
R
IN
AUDIO
L
VIDEO OUT
Audio Left: White
Audio Right: Red
21