Decoder Switching Operation; Selecting The Output From The Vcr - Sharp DV-NC70H Operation Manual

Decoder Switching Operation

If you have a separate decoder connected to the Unit's L2 input as
previously shown in the "Basic Connection" section, you will need to
set the decoder function to ON in order to record the unscrambled
signal and/or watch it on your TV. Now, when the Unit receives a
scrambled signal it is output via LINE 2 terminal to the decoder. The
decoder then outputs the unscrambled signal back to LINE 2
terminal and the signal can be recorded. The Unit outputs the
descrambled signal to your TV through the LINE 1 terminal and you
can watch the unscrambled picture.
When making recording using a separate decoder connected as
shown, remember to leave the decoder function ON.
If you connect a decoder unit to this Unit, the decoder unit provides
a switching signal which will automatically allow your TV to display
the unscrambled signal routed through the Unit. To use this feature
make sure that the Unit is connected to both TV and decoder unit by
the SCART leads. Then:
• Press OPERATE to place the Unit in STAND-BY mode.
OR
• Press TV/VCR to place the Unit in "VCR mode". The "VCR"
indicator appears on the VCR Front Panel display.

Selecting the Output From the VCR

If your VCR is connected to your TV with a scart lead, when you start
to play a video tape the VCR will automatically switch its output so
that the playback picture is shown on the TV. In this case, "VCR" will
appear on the VCR display.
You can manually override this by pressing TV/VCR on the remote
control. Now the TV broadcast channel will be seen on the TV screen
and "VCR" will disappear from the VCR display.
• Pressing TV/VCR again will return the TV picture to the playback
picture.
• While in DVD mode, the unit will override this function.
DVNC70H028_038.pm6
www.sharp.co.uk/support
37
DV-NC70
PAL
OPERATE EJECT/STOP
REW PLAY/X2
/ REC
VCR/DVD
CH
SELECTOR
VCR DVD
LINE IN 3 VIDEO L - AUDIO - R
STOP
EJECT /
OPERATE
TIMER
OPERATE
VIDEO Plus+ EJECT
ON/OFF
ON VCR/DVD VCR MENU
DISPLAY
SCREEN SELECTOR DVD SETUP
FUNCTION PROG/ OPEN/
ANGLE
CONTROL REPEAT CLOSE
TITLE
DVD MENU
CLEAR SET
RETURN ENTER
ZERO BACK
SKIP SEARCH
TV/VCR
AM/PM INPUT SELECT VCR DVD
/
REV FWD
PLAY
REC
PAUSE/STILL
STOP
TAPE DPSS
SKIP SLOW
SPEED
AUDIO
CH
OUTPUT
VCR DVD
VCR/DVD COMBINATION
RRMCGA054WJSA
29/8/02, 3:01 pm
VCR Setup
DVD / CD PLAYER
STOP
PLAY OPEN/CLOSE
TIMER
37