Configure A Management Route; Configure A Username And Password - Dell Force10 S4810P Quick Start Manual

Step Task
Enter INTERFACE
1
mode for the
Management port.
Assign an IP address
2
to the interface.
Enable the interface.
3

Configure a Management Route

Define a path from the system to the network from which you are accessing the
system remotely. Management routes are separate from IP routes and are only
used to manage the system through the management port.
Task
Configure a
management route to
the network from
which you are
accessing the system.

Configure a Username and Password

Configure a system username and password to access the system remotely.
Task
Configure a username
and password to
access the system
remotely.
16
Installing the Software
Command Syntax
interface ManagementEthernet
slot/port
ip address ip-address/mask
no shutdown
Command Syntax
management route ip-address/mask
gateway
Command Syntax
username username password
[encryption-type]
Command Mode
CONFIGURATION
INTERFACE
INTERFACE
Command Mode
CONFIGURATION
Command Mode
CONFIGURATION