Dell XPS /Dimension Owner's Manual page 99

IDE hard drive example
Connect the power and hard-drive cables to the drive.
7
Check all connectors to be certain that they are properly cabled and firmly seated.
8
Close the computer cover (see page 82).
9
NOTICE: To connect a network cable, first plug the cable into the network wall jack and then
plug it into the computer.
Connect your computer and devices to electrical outlets, and turn them on.
10
See the documentation that came with the drive for instructions on installing any
software required for drive operation.
power cable
tabs (2)
IDE hard-
drive cable
IDE hard
drive
system board
connector
power cable
serial ATA hard drive example
Rem ov i ng a n d I n s t a l l i n g Par t s
tabs (2)
serial ATA
hard drive
serial ATA hard-
drive cable
system board
connector
99