I/O Modules-Pass-Through; Dell 4 Gbps Fibre Channel Pass-Through Module - Dell External M1000e t Owner's Manual

Indicator
Amber blinking
rapidly
Fibre channel
Indicator
port speed
indicator
Off
Green on
Amber on
Module status
Indicator
indicator
Off
Green on
Amber on
Green/amber
blinking
Module power
Indicator
indicator
Off
Green
Status/
Indicator
identification
indicator
Blue on
Blue off
Blue blinking
Amber blinking
I/O Modules—Pass-Through

Dell 4 Gbps Fibre Channel Pass-Through Module

The 4 Gbps fibre channel pass-through module provides a bypass connection between a fibre channel mezzanine card
in the blade and optical transceivers for direct connection into a fibre channel switch or a storage array. The 16 pass-
through ports on this module can negotiate speeds of 1 Gbps, 2 Gbps, or 4 Gbps. The 4 Gbps fibre channel pass-through
module is hot-swappable, and may be installed in Fabric B or Fabric C.
NOTE: To ensure proper functionality, use only the Short Wave SFP transceivers provided with this module.
64
Status
Error or fault with port
Status
2 Gb link established
4 Gb link established
8 Gb link established
Status
Module is off or enclosure power is off
All ports are ready for use
Module is booting, being reset, or ports are offline
Diagnostic message is in error log, or environmental range is
exceeded
Status
Power to the module is off
Module has power
Status
Normal health
Boot in progress
Identifying module
Fault condition in module