Table of Contents
Advertisement
This could result in electric shock or fire.
Be careful, the paper output area is hot.
Burns could occur.
If the machine has been dropped, or if the cabinet
appears damaged, unplug the machine from all
interface connections and request assistance from
qualified service personnel.
Otherwise, this could result in electric shock or fire.
If the machine exhibits a sudden and distinct change
in performance, unplug the machine from all interface
connections and request assistance from qualified
service personnel.
Otherwise, this could result in electric shock or fire.
Operating method
Caution
Do not forcefully pull the paper out
during printing.
It can cause damage to the
machine.
Be careful not to put your hand
between the machine and paper
tray.
You may get injured.
Do not block or push objects into the
ventilation opening.
This could result in elevated component
temperatures which can cause damage or fire.
Use care to avoid paper cuts when replacing
paper or removing jammed paper.
You may get hurt.
Installation / Moving
Warning
Do not place the machine in an area with dust, humidity or water leaks.
This could result in electric shock or fire.
Caution
When moving the machine, turn
the power off and disconnect all
cords; then lift the machine with
at least two people.
The machine could fall, causing human injury
or machine damage.
Do not place the machine on an unstable
surface.
Call an electrician to change the electrical outlet, or this
could result in electric shock.
Do not allow pets to chew on the AC power, telephone or
PC interface cords.
This could result in electric shock or fire and/or injury to your
pet.
If the machine does not operate properly after these
instructions have been followed, unplug the machine from all
interface connections and request assistance from qualified
service personnel.
Otherwise, this could result in electric shock or fire.
When printing large quantities, the bottom part of the
paper output area may get hot. Do not allow children to
touch.
Children may be burned.
When removing jammed paper, do not use tweezers or
sharp metal objects.
It can cause damage to the machine.
Do not allow too many papers to stack up in the paper output tray.
It could cause damage to the machine.
This machine's power interception device is the power cord.
To switch off the power supply, remove the power cord from the
electrical outlet.
Do not put a cover over the machine or place it in an airtight
location, such as a closet.
If the machine is not well-ventilated, this could result in fire.
Make sure you plug the power cord into a grounded electrical outlet.
Otherwise, this could result in electric shock or fire.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
