Dell 1130 Laser Mono Printer Troubleshooting Manual page 80

Vertical repetitive defects
Background scatter
Misformed characters
Page skew
Curl or wave
Wrinkles or creases
Back of printouts are dirty
Solid Color or Black pages
If marks repeatedly appear on the printed side of the page at even intervals:
The toner cartridge may be damaged. If you still have the same problem,
remove the toner cartridge and, install a new one. (See
cartridge.)
Parts of the machine may have toner on them. If the defects occur on the back
of the page, the problem will likely correct itself after a few more pages.
The fusing assembly may be damaged. Contact a service representative.
Background scatter results from bits of toner randomly distributed on the printed
page.
The paper may be too damp. Try printing with a different batch of paper. Do
not open packages of paper until necessary so that the paper does not absorb
too much moisture.
If background scatter occurs on an envelope, change the printing layout to
avoid printing over areas that have overlapping seams on the reverse side.
Printing on seams can cause problems.
If background scatter covers the entire surface area of a printed page, adjust
the print resolution through your software application or in Printing
Preferences. (See
Opening printing
If characters are improperly formed and producing hollow images, the paper
stock may be too slick. Try different paper. (See
Ensure that the paper is loaded properly.
Check the paper type and quality. (See
Ensure that the guides are not too tight or too loose against the paper stack.
Ensure that the paper is loaded properly.
Check the paper type and quality. Both high temperature and humidity can
cause paper curl. (See
Turn the stack of paper over in the tray. Also try rotating the paper 180° in the
tray.
Ensure that the paper is loaded properly.
Check the paper type and quality. (See
Turn the stack of paper over in the tray. Also try rotating the paper 180° in the
tray.
Check for leaking toner. Clean the inside of the machine. (See
inside.)
The toner cartridge may not be installed properly. Remove the cartridge and
reinsert it.
The toner cartridge may be defective. Remove the toner cartridge and install a
new one. (See Replacing the toner
preferences.)
Print media
Print media specifications.)
Print media
cartridge.)
Replacing the toner
Print media specifications.)
specifications.)
specifications.)
Cleaning the