Network Setup - D-Link DNR-326 User Manual

Section 3 - Configuration
Network Setup allows you to configure the LAN settings for your NAS device.
DHCP: Select this connection if you have a DHCP server
running on your network and would like a dynamic
IP address to be automatically updated to your NVR.
Static IP: You may obtain a static or fixed IP address and
other network information from your network
administrator for your NVR. A static IP address will
simplify access to your NVR in the future.
IP Address: The fixed IP address.
Subnet Mask:
The default value 255.255.255.0 is used to determine
if the destination is in the same subnet.
Gateway IP The gateway forwards frames to destinations in a
Address:
different subnet. Invalid gateway settings may cause
the failure of transmissions to a different subnet.
Primary domain name server that translates names
DNS1:
to IP addresses.
Secondary domain name server to backup the
DNS2: primary one.
Enable this setting if your ISP (DSL service) is using
PPPoE PPPoE. You may already have a Username and
Settings: Password provided by your ISP, or you may need
to contact your ISP. The connection status will be
determined automatically by the system.
Enable or disable the DHCP server. If your network
DHCP server: doesn't have DHCP server, enable NVR DHCP server
for easier local network setup.
D-Link DNR-326 User Manual

Network Setup

20