D-Link DNR-326 User Manual page 42

Section 3 - Configuration
The four RAID configurations are:
Standard:
Creates two separate volumes (or one volume if
only one hard drive is present). The second volume
will function as a File Server. Each hard drive has
its own volume.
Note:
Only Standard mode can create the Volume2,
which is available as a File (Samba) Server. Use the
NVR Search utility to mount the File Server to your
Windows system.
JBOD:
Combines both hard drives in a linear fashion
which will create one large volume geared towards
maximum available space.
RAID 0:
Combines both hard drives in a striped fashion
which will create one large volume geared towards
maximum performance.
Note: If one drive fails, all the data will be lost.
RAID 1:
Mirrors the hard drives for redundancy. If one hard
drive fails, the other still has all of the data. Replace
the failed hard drive and it will re-mirror, restoring
maximum data protection.
The main RAID page has an Auto-Rebuild Configuration that allows you to enable or disable the Auto-Rebuild feature. Please
see the image on page 37. You can also manually rebuild by clicking the Rebuild button in the RAID Configuration section.
Note: Rebuilding the volume will erase all data on the newly inserted drive.
D-Link DNR-326 User Manual 38