Audio And Video - D-Link DNR-326 User Manual

Section 3 - Configuration
This section will allow you to configure and modify the audio and video parameters for each camera.
Step 1: Select the camera which you would like to
modify in the camera list.
Step 2: The NVR will display the parameters for the
selected camera. You can modify the information
at this page.
Camera
The name of the camera.
Name:
Video Format:
Select the video format that the camera supports.
Frame rate:
Select the frame rate.
Resolution:
Select the resolution.
Quality:
Select the image quality.
Audio: Check the Enable Audio option for live view and
recording.
Go to Web:
Click to connect to the web page of the selected
network camera for advanced setup. For example,
motion detection should be configured via the
camera web interface to enable the NVR to
receive the trigger message.
Step 3: Click the Save Settings button.
Note: The system will adjust the frame rate automatically based
on the maximum frame rate which that camera can support.
D-Link DNR-326 User Manual

Audio and Video

23