Table of Contents
Advertisement
6.3.1
Creating a RAID set
To create a RAID set
From the utility main menu, select 1. Create RAID Volume and press
1.
<Enter>. The following screen appears.
Intel(R) Matrix Storage Manager option ROM v8.5.0.1030 ICH10R/DO wRAID5
[↑↓]Change
2.
Enter a name for the RAID set and press <Enter>.
When the RAID Level item is selected, press the up/down arrow key to select
3.
a RAID level to create, and then press <Enter>.
When the Disks item is selected, press <Enter> to select the hard disk drives
4.
you want to include in the RAID set. The SELECT DISKS screen appears.
Port Drive Model
0
ST3160812AS
1
ST3160812AS
2
ST3160812AS
3
ST3160812AS
[ ↑↓ ]-Prev/Next [SPACE]-SelectDisk [ENTER]-Done
5.
Use the up/down arrow key to select a drive, and then press <Space>
to select. A small triangle marks the selected drive. Press <Enter> after
completing your selection.
6-24
Copyright(C) 2003-08 Intel Corporation.
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Sync:
Enter a unique volume name that has no special characters and is
[TAB]-Next
[ SELECT DISKS ]
Serial #
9LS0HJA4
9LS0F4HL
3LS0JYL8
9LS0BJ5H
Select 2 to 6 disks to use in creating the volume.
[
CREATE VOLUME MENU
Volume0
RAID0(Stripe)
Select Disks
128KB
0.0
GB
N/A
Create Volume
[
HELP
]
16 characters or less.
[ESC]-Previous Menu
Size
Status
149.0GB
Non-RAID Disk
149.0GB
Non-RAID Disk
149.0GB
Non-RAID Disk
149.0GB
Non-RAID Disk
All Rights Reserved.
]
[ENTER]-Select
Chapter 6: RAID configuration
Advertisement
Table of Contents
