Table of Contents
Advertisement
2.
Press the load lever with your thumb
(A), then move it to the left (B) until
it is released from the retention tab.
To prevent damage to the socket
pins, do not remove the PnP cap
unless you are installing a CPU.
3.
Lift the load lever in the direction of
the arrow to a 135º angle.
4.
Lift the load plate with your thumb
and forefinger to a 100º angle.
5.
Remove the PnP cap from the CPU
socket.
2-4
Retention tab
A
B
Load lever
Load plate
4
PnP cap
Chapter 2: Hardware setup
3
Advertisement
Table of Contents
