Adjusting Satin Settings For Appliqué Style Text - Brother BES Lettering Instruction Manual

Adjusting Satin Settings for
Appliqué Style Text
You can modify the settings and make all changes to the satin
stitches in the Appliqué box.
To adjust Satin stitch settings for Appliqué:
1 Select the Appliqué text segment.
2 In the Properties panel, in the Appliqué type field, select
Satin.
3 Adjust any of the following settings in the Properties panel:
 In the Stitch Length box, enter the stitch length of the
positioning and tack down runs.
 In the Appliqué Width box, enter the width of the satin
stitching.
 In the Appliqué Density box, enter the density of the
Satin stitching.
 In the Inset box, select a percentage to inset the edge of
the appliqué border, relative to the outline of the
lettering.
4 Click Apply.
Adjusting Blanket Settings for
Appliqué Style Text
After you select the Appliqué stitch type, you can adjust any of
the default settings available. You must make all changes to the
Appliqué stitches from the Appliqué box.
To adjust blanket settings for Appliqué:
1 Select the Appliqué text segment.
2 In the Properties panel, in the Appliqué type field, select
Blanket.
3 Adjust any of the following settings in the Properties panel:
 In the Stitch Length box, enter the stitch length of the
positioning and tack down runs.
 In the Appliqué width box, enter the width of the blanket
stitching.
Text Properties 73