Brother BES Lettering Instruction Manual page 99

To select multiple components in the design:
1 From the Home tab, click the Select
2 Click a design component. Press CTRL on your keyboard
while you click each design component not already
selected.
The active design components will be enclosed in a selection
box with handles.
To select all components of the design:
Using the Select tool, click in the workspace, and draw a
box large enough to enclose all components of the design.
• To select all the design components currently in the active
window, do one of the following:
 Click on the small down arrow under the Select tool on
the ribbon, and choose Select All.
 Press Ctrl + A on the keyboard.
To select segments using the Sequence View area:
1 On the Ribbon, choose the Home tab.
2 Click the Select
3 In the Sequence View, select the group of segments which
contains the desired segment or segments; if it is not
already in expanded view, click the small plus sign next to
the group in order to the list of individual segments in the
group.
tool.
tool to change to Outline Mode.
Editing Designs 97