Dell 5330dn Workgroup Mono Laser Printer User Manual page 15

3.Settings
Setup
Use this menu selection to configure a variety of printer features.
Menu selection: Purpose:
Language Determines the text language
displayed on the operator panel.
Power save Specifies the number of minutes
the printer waits after a job is
printed before it goes into a
reduced power state.
Altitude Adjust Optimizes print quality according
to your altitude.
Timeout Specifies the amount of time (in
seconds) the printer waits to
return to the home screen,
receive an end-of-job message,
or receive additional bytes of
data from the computer.
NOTE: Wait Timeout is only
available when you use
PostScript emulation. This menu
value has no effect on PCL
emulation print jobs.
Print Recovery
Auto CR Allows you to append the
Values:
English After selecting each item, the
page will print, and the printer
will return to Ready.
Deutsch
Espanol
FRANCAIS
Italiano
Nederlands
5 min Specifies the number of minutes
after a print job before the
printer goes into Power Save
10 min
mode. (Your printer may not
support the entire range of
15 min
values.)
30 min
The factory default Power Save
setting depends on your printer
model. Print the menu settings
60 min
page to determine the current
Power Save setting. When the
120 min
printer is in Power Save mode, it
is still ready to receive print jobs.
Select a high value if your printer
is in constant use. Under most
circumstances, this keeps the
printer ready to print with
minimum warm-up time.
Plain Plain: 0 m ~ 1,000 m
l
High: 1,000 m ~ 2,000 m
l
Higher: 2,000 m ~ 3,000 m
l
High
Highest: 3,000 m ~ 4,000
l
m
Higher
Highest
Print Time Out 15-180 - Specifies the amount of
time the printer waits for an end-
of-job message before canceling
15, 30, 60, 90*,
the remainder of the print job.
180
When the timer expires, any
partially formatted page still in
the printer is printed, and other
input ports are examined to see if
data exists.
90* is the default setting.
Auto Continue Determines whether or not the
printer continues printing when it
detects the paper unmatched to
On
your paper setting.
Off
On: If the paper mismatch
l
occurs, an error message
will display. The printer
goes offline for 30 seconds,
then automatically clears
the message and
continues printing.
Off: If a paper mismatch
l
occurs, an error message
remains on the display,
and the printer remains off-
line until you insert the
correct paper.
Jam Recovery Specifies whether the printer
reprints jammed pages.
On
On: Printer reprints
l
jammed pages.
Off
Off: Printer does not
l
reprint jammed pages.
LF Refers to the following samples: