Dell 5330dn Workgroup Mono Laser Printer User Manual page 16

required carriage return to each
line feed.
Date & Time (Only See "Setting the time and
if HDD is installed)
DayLight Saving See "Setting Daylight Savings
(Only if HDD is Time".
installed)
Quality
Use this menu selection to change settings that affect print quality and save toner.
Menu selection: Purpose:
Resolution Selects printed output resolution.
Darkness Lightens or darkens printed
output and conserves toner.
Finishing
Use this menu selection to define how the printer delivers the printed output.
Menu selection: Purpose:
Copies Set the default number of copies
by selecting any number from 1
to 999.
Orientation Choose the default orientation of
the print image on the page.
Margin Shift Set the margin of print materials
for one-sided printing. Increase
or decrease the value in 0.1 mm
increments.
Duplex To print on both sides of paper.
LF+CR
date".
Manual
Auto
Off
Values:
600dpi Specifies the number of dots
printed per inch (dpi). The higher
the setting, the sharper the
1200dpi
printed characters and graphics
appear.
Draft Mode
l
l
Normal Lighten or darken the print on
the page by changing the toner
density setting. The Normal
Light
setting usually produces the best
result. Use the Light toner
Dark
density setting to save toner.
Values:
1 - 999
Portrait
Landscape
Top Margin Top Margin: Set the top margin,
l
from 0 to 250 mm.
Left Margin: Set the left margin,
l
[0-250]
from 0 to 164 mm.
Left Margin
[0-164]
Off Choose the binding edge as follows.
Long Edge Long Edge: Flip on the long
l
edge.
Short Edge: Flip on the short
l
Short Edge
edge.
If the print jobs are mostly
text, select 600dpi-
Normal for the highest
quality printing.
Select 1200dpi-Best when
your job contains
bitmapped images, such as
scanned photos or some
graphics, that will benefit
from enhanced line
screening.