3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
●
WLAN module (see
●
Hard drive (see
●
Keyboard (see
●
Top cover (see
●
Speakers (see
●
USB board (see
●
Power connector cable (see
●
Display assembly (see
●
System board (see
●
Fan/heat sink assembly (see
To remove the processor:
1.
Use a flat-bladed screw driver (1) to turn the processor locking screw one-half turn
counterclockwise (2) until you hear a click.
Battery on page
41), and then remove the following components:
WLAN module on page
Hard drive on page
54)
Keyboard on page
60)
Top cover on page
63)
Speakers on page
71)
USB board on page
73)
Power connector cable on page
Display assembly on page
System board on page
Fan/heat sink assembly on page
49)
75)
77)
86)
92)
Component replacement procedures
99