Optical Drive Cable - HP 240 Maintenance And Service Manual

Optical drive cable

Description
Optical drive cable (includes cable bracket)
Before removing the optical drive cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
●
WLAN module (see
●
Hard drive (see
●
Keyboard (see
●
Top cover (see
●
Speakers (see
●
USB board (see
●
Power connector cable (see
●
Display assembly (see
●
System board (see
Remove the optical drive cable:
1. Remove the Phillips PM2.0×3.0 screw (1) that secures the optical drive cable and cable bracket
to the base enclosure.
2. Remove the cable bracket (2) and cable (3).
90 Chapter 4 Removal and replacement procedures
Battery on page 41), and then remove the following components:
WLAN module on page
Hard drive on page 54)
Keyboard on page 60)
Top cover on page 63)
Speakers on page 71)
USB board on page 73)
Power connector cable on page
Display assembly on page
System board on page
49)
75)
77)
86)
Spare part number
685084-001