5.7 Scanner Ass'y
1. Before you remove the Scanner Ass'y, you should
remove:
- Rear Cover (Refer to 5.4)
- Side Cover (Left, Right) (Refer to 5.6)
2. Remove the two screws securing the Scanner Ass'y,
as shown below.
3. Remove the one screw securing the Ground Cable
and unplug the four connectors and CCD Cable.
ADF Ground Cable
4. Pull up the Scanner Ass'y, as shown below.
5. Release the ADF Harness from the underneath the
Scanner Ass'y.
Precautions
Scanner Ass'y
ADF Harness
Service Manual
5-11