Clearing Paper Jams - Dell 1815 Mono Laser Service Manual

Alignment & Adjustments

6.2 Clearing Paper Jams

Occasionally, paper can be jammed during a print job. Some of the causes include:
• The tray is loaded improperly or overfilled.
• The tray has been pulled out during a print job.
• The front cover has been opened during a print job.
• Paper was used that does not meet paper specifications.
• Paper that is outside of the supported size range was used.
If a paper jam occurs, LCD window will show it' s speeds. Find and remove the jammed paper. If you don't see
the paper, open the covers.
Do not use a pinset or a sharp metal tool when removing a jam.
The covering of a metal part can be removed which can cause an electric leakage.
Service Manual
6-2