Chapter2; Installation Of The Scanner; Chapter2 Installation Of The Scanner; Installing The Scanner Application - Fujitsu fi-5015C Getting Started

Chapter2

2.1 Installing the Scanner
Application
For scanning documents with this scanner, both scanner
driver and image capturing application software (called
"application" hereafter) must be installed on your PC.
The following scanner drivers and applications are pro-
vided:
• Scanner Driver:
FUJITSU TWAIN 32 Scanner Driver
FUJITSU ISIS Scanner Driver
• Scanning application:
ScandAll 21 (for FUJITSU TWAIN 32)
TM
QuickScan Pro
Install the appropiate scanner driver for the application
you will use. The following sections describe installa-
tion of each driver and application.
Please install the scanner driver before
ATTENTION
connecting the scanner to your PC.
If you connect the scanner before install-
ing the scanner driver, the scanner will not
operate correctly.
If you have connected the scanner before-
hand, the "Found New Hardware Wizard"
screen appears (this screen might differ
slightly according to the used OS) . On this
screen, click the [Cancel] button to close
the Wizard screen and install the scanner
driver first.
For FUJITSU TWAIN32 Scanner Driver
■ Preparation
Confirm the following items before installing the appli-
cation.
• Take out the Setup CD-ROM from its pack-
age, but do not insert the Setup CD-ROM
into the CD driver yet.
• Uninstall any older version of FUJITSU
TWAIN 32 driver if already installed.
Uninstall [Scanner Utility for Microsoft Win-
ATTENTION
dows] from [Add/Remove Programs] of the
control panel.

INSTALLATION OF THE SCANNER

(Trial) (for FUJITSU ISIS )
fi-5015C Image Scanner Getting Started
■ Installing the FUJITSU TWAIN32
Scanner Driver
Windows XP screenshots are used in this
ATTENTION
section as examples. The windows and
operations may slightly vary depending on
.
your OS
1. Turn on your PC and log on to Windows.
When using Windows 2000 or Windows
ATTENTION
XP, log on as a user with "Administrator"
privileges.
2. Insert the Setup CD-ROM into the CD drive.
⇒
<SETUP DISK START UP SCREEN> appears.
This screen may not appear when the
ATTENTION
"Autoplay" setting of your PC is OFF. In
this case, run "Install.exe" in this CD-ROM
directly from the "Explorer" or "My Com-
puter".
3. Click [INSTALL PRODUCTS].
4. Click [TWAIN Driver] on the window below.
3