Appendix2 Daily Care; Cleaning Materials; Cleaning Method - Fujitsu fi-5015C Getting Started

Appendix2
When operating the scanner, the
ARNI N G
ADF's inside glass becomes very
hot.
Before you clean inside the scan-
ner, turn off its power and unplug
the AC adapter from the outlet. Wait
for at least 15 minutes.

■ Cleaning Materials

Cleaning
Parts No.
Materials
Cleaner F1 CA99501-
(or isopropyl 0013
alcohol)
Lint-free dry - Commercially available one
cloth
For details about the cleaning materials, contact the
FUJITSU scanner dealer where you purchased the scan-
ner.

■ Cleaning Method

The ADF must be cleaned with a lint-free cloth moist-
ened with the Cleaner F1.
AP-4
DAILY CARE
Remarks
1 bottle
Moisten a cloth with
this fluid and wipe the
scanner clean.
■ Locations and Cycle for Cleaning
Part to clean
Pad ASSY
Pick roller unit
Pinch roller
Glass
The scanner must be cleaned more fre-
ATTENTION
quently if you scan any of the following
type of sheets:
•
Documents of coated paper
•
Documents that are almost completely
covered with printed text or graphics
•
Chemically treated documents such
as carbonless paper
•
Documents containing a large amount
of calcium carbonate
•
Documents written by pencil
•
Documents with not enough fixed a
toner.
For details on the cleaning the ADF, refer to "3.2 clean-
ing the ADF" in fi-5015C Operator's Guide on the Setup
CD-ROM".
Standard Cleaning Cycle
Clean these parts after every
1,000 scans.