Temporary Error - Fujitsu fi-5015C Getting Started

■ Temporary error

Indication
U0 Shipping lock error occurred.
U1 A paper feed error occurred.
U9 ADF error.
The following shows the procedure for releasing of each
temporary error.
• "U0" error
Confirm that the shipping lock is released.
Refer to "2.2 Installing the Scanner" (page 9)
• "U1" error
1. Remove jammed documents.
(Refer to fi-5015C Operator's Guide "3.1 How
to clear the paper jam" on the Setup CD-ROM.)
2. Confirm that the documents meet the paper
conditions for scanning.
(Refer to fi-5015C Operator's Guide "2.2.1
Checking document condition" on the Setup
CD-ROM.)
• "U9" error
Turn off the scanner power. Confirm / Connect
the ADF cable, then turn on the scanner power.
* Be sure of switching off the main switch, in
case you make any operation with ADF cable.
Description
fi-5015C Image Scanner Getting Started
■ Device alarm (Permanent error)
Indication
E0 Flatbed motor malfunction.
E2 Trouble in the optical system.
E7 Trouble occurred in the internal memory
(EEPROM).
Eb An LSI error.
Ec An error in the memory.
Ed An error with USB
When you encounter any alarm, turn off and on the
scanner. If the alarm is still displayed on the Function
Number Display, contact the store where you purchased
the scanner or an authorized FUJITSU scanner service
provider.
Description
AP-3