Palm Rest; Removing The Palm Rest - Dell Latitude C400 Service Manual

Palm Rest : Dell Latitude C400 Service Manual
Back to Contents Page

Palm Rest

Dell™ Latitude™ C400 Service Manual

Removing the Palm Rest

Replacing the Palm Rest
Removing the Palm Rest
NOTICE: Disconnect the computer and any attached devices from electrical outlets, and
remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an
unpainted metal surface on the computer.
NOTICE: Read
procedure.
1. Remove the hard
2. Remove the keyboard.
NOTICE: You must remove the display assembly before you remove the palm rest; the display
hinges pass through the back of the palm rest.
3. Remove the display
4. Turn the computer over and remove the four M2.5 x 6-mm screws (two screws to each side of
the battery bay).
Palm-Rest Screws on Bottom of Computer
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...Latitude/C400/C400_SERVICE_MANUAL/palmrest.htm (1 of 5)6/21/2004 1:20:14 AM
"Preparing to Work Inside the
drive.
assembly.
Computer" before performing the following