Display Bezel; Display Panel - Dell Latitude D600 Service Manual

Display Assembly and Display Latch: Dell Latitude D600 Service Manual
3

display bezel

4

display panel

Display Bezel
CAUTION: Before performing the following procedures, read the safety instructions in
your System Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by
periodically touching an unpainted metal surface (such as the back panel) on the computer.
1. Follow the instructions in
2. Remove the keyboard.
3. Remove the display
4. Use a plastic scribe to pry the six display bumpers out of the screw holes located on the front of
the bezel.
5. Remove the six M2 x 5-mm screws located on the front of the bezel.
NOTICE: Carefully separate the bezel from the top cover to avoid damage to the
bezel.
6. Starting at the bottom of the display panel (by the Dell™ logo), use your fingers to separate the
bezel from the top cover by lifting the inside edge of the bezel away from the top cover.
Display Panel
CAUTION: Before performing the following procedures, read the safety instructions in
your System Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by
touching an unpainted metal surface on the computer.
1. Follow the instructions in
2. Remove the keyboard.
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA.../Latitude/D600/D600_SERVICE_MANUAL/display.htm (6 of 9)6/21/2004 2:15:18 AM
6M873
See MINI RSL
"Preparing to Work Inside the
assembly.
"Preparing to Work Inside the
7 flex cable
8 M2 x 5-mm screws (4)
Computer."
Computer."
6M871