Dell Latitude D600 Service Manual page 36

Display Assembly and Display Latch: Dell Latitude D600 Service Manual
3. Remove the display
4. Remove the two M2 x 3-mm screws from each side of the display panel, and remove the display
side brackets.
NOTE: When you replace the display side brackets, ensure that the tabs on the brackets are
facing up.
1 display panel
2 display side brackets (2)
3 M2 x 3-mm screws (4)
5. Remove the two M2 x 5-mm screws from each side of the display panel.
6. Unsnap the cable from the top cover hook, and lift the bracket out of the display assembly.
7. Lift the display panel, and rotate the display panel out of the top cover.
8. Use the pull-tab to disconnect the bottom flex-cable connector from the inverter connector.
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA.../Latitude/D600/D600_SERVICE_MANUAL/display.htm (7 of 9)6/21/2004 2:15:18 AM
bezel.
See MINI RSL
8T145
4270E