Removing The Microprocessor Thermal-Cooling Assembly - Dell Latitude D600 Service Manual

Microprocessor Thermal-Cooling Assembly: Dell Latitude D600 Service Manual
Back to Contents Page
Microprocessor Thermal-Cooling Assembly
Dell™ Latitude™ D600 Service Manual

Removing the Microprocessor Thermal-Cooling Assembly

CAUTION: Before performing the following procedures, read the safety instructions
in your System Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or
by periodically touching an unpainted metal surface (such as the back panel) on the computer.
NOTICE: Disconnect the computer and any attached devices from electrical outlets, and
remove any installed batteries.
1. Follow the instructions in
2. Remove the keyboard.
NOTE: You can remove the microprocessor thermal-cooling assembly with the fan
attached.
3. Loosen in consecutive order the four captive screws, labeled "1" through "4," that secure the
microprocessor thermal-cooling assembly to the system board.
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA.../Latitude/D600/D600_SERVICE_MANUAL/thermal.htm (1 of 3)6/21/2004 2:15:21 AM
"Preparing to Work Inside the Computer."