Dell Latitude D600 Service Manual page 19

5. Remove the bezel screw and the bezel from the hard drive.
6. Remove the new drive from its packaging.
Save the original packaging to use when storing or shipping the hard drive.
7. Attach the bezel to the new hard drive with the bezel screw.
NOTICE: If you do not open the display before you replace your hard drive, you might permanently scratch your display bezel.
8. Open the display approximately 1/2 inch.
NOTICE: Use firm and even pressure to slide the drive into place. If you force the hard drive into place using excessive force, you may damage the
connector.
9. Press the hard drive cover down until it is fully seated in the bay, and tighten the screw.
10. Use the Operating System CD to install the operating system for your computer.
11. Use the Drivers and Utilities CD to install the drivers and utilities for your computer.
Back to Contents Page