Removing The System Board - Dell Latitude X200 Service Manual

System Board: Dell Latitude X200 Service Manual
Back to Contents Page
System Board
Dell™ Latitude™ X200 Service Manual

Removing the System Board

NOTICE: Disconnect the computer and any attached devices from electrical
outlets.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an
unpainted metal surface on the computer.
NOTICE: Read
procedure.
1. Remove the battery.
2. Remove the keyboard.
3. Remove the palm
4. Remove the hinge
5. Remove the display
6. Remove the keyboard
7. Remove the hard
8. Remove the memory
9. Remove the Mini PCI
10. Remove the four M2 x 4-mm screws that secure the system board to the bottom case.
NOTE: Each system board screw has an arrow beside
it.
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...Latitude/X200/X200_SERVICE_MANUAL/sysboard.htm (1 of 3)6/21/2004 3:03:19 AM
"Preparing to Work Inside the
rest.
covers.
assembly.
tray.
drive.
module.
card, if present.
Computer" before performing the following