NOTICE:
The modem connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors for proper alignment.
1. Connect the modem cable to the new modem.
2. Align the screw holes on the modem with the screw holes on the system board and the base of the computer.
3. Press the modem into the connector on the system board.
4. Replace the two M2 x 3-mm screws and secure the modem to the system board and the base of the computer.
5. Replace the palm rest (see
6. Replace the internal card with Bluetooth wireless technology, if installed (see
7. Replace the display assembly (see
8. Replace the keyboard (see
9. Replace the hinge cover (see
10. Replace the hard drive (see
11. Replace the optical drive (see
Back to Contents Page
Replacing the Palm
Rest).
Replacing the Display
Assembly).
Replacing the
Keyboard).
Replacing the Hinge
Cover).
Replacing a Hard
Drive).
Replacing the Optical
Drive).
Replacing the Bluetooth
Card).